A RGB LCD raspberry pi hat
Ви не можете вибрати більше 25 тем Теми мають розпочинатися з літери або цифри, можуть містити дефіси (-) і не повинні перевищувати 35 символів.
 
 
 
 
Julian Daube 88683d42a2 Gerber: change to a single drill file for NPTH and PTH combined 3 роки тому
3d models added missing 3D Models 3 роки тому
FPC_4_extender added gerber for fpc 4pin extender 3 роки тому
FPC_40_4_extender added fpc Extender because for 4pin 1mm nothing is available 3 роки тому
Gerber Gerber: change to a single drill file for NPTH and PTH combined 3 роки тому
bom kitspace: add bom 3 роки тому
docs add simple README 3 роки тому
footprints Did first review, various changes to pcb occured. 3 роки тому
libs wired up connectors, 3 роки тому
.gitignore Did first review, various changes to pcb occured. 3 роки тому
LICENSE.txt license the project under CERN OSHW-S 3 роки тому
README.md add simple README 3 роки тому
config.kibot.yaml Gerber: change to a single drill file for NPTH and PTH combined 3 роки тому
fp-lib-table Did first review, various changes to pcb occured. 3 роки тому
kitspace.yaml kitspace: add bom 3 роки тому
rgb_lcd_pihat-cache.lib license the project under CERN OSHW-S 3 роки тому
rgb_lcd_pihat-rescue.dcm Did first review, various changes to pcb occured. 3 роки тому
rgb_lcd_pihat-rescue.lib Did first review, various changes to pcb occured. 3 роки тому
rgb_lcd_pihat.dcm began work 3 роки тому
rgb_lcd_pihat.kicad_pcb readded OSHW logo to pcb after merge conflict 3 роки тому
rgb_lcd_pihat.lib began work 3 роки тому
rgb_lcd_pihat.net did updates to Rev 00.00.02 3 роки тому
rgb_lcd_pihat.pro readded OSHW logo to pcb after merge conflict 3 роки тому
rgb_lcd_pihat.sch license the project under CERN OSHW-S 3 роки тому
sym-lib-table Did first review, various changes to pcb occured. 3 роки тому

README.md

demo gif

This is a hat for the 40pin GPIO headered Raspberry PIs that exposes the RGB LCD interface in such a way to make it usable with a (albait very specific) lcd screen with touch screen.

Touch screen support is implemented with the AR1100 over a USB cable, which must be plugged to the RPI seperatly.

For the Backlight a small constant LED driver is on board as well, which can be dimmed by using a the hardware PWM1 with GPIO19.