julian.daube
/
rgb_lcd_hat
1
1
Çatalla 0
Kod Konular 0 Değişiklik İstekleri 0 Sürümler 1 Wiki Aktivite
A RGB LCD raspberry pi hat
25'ten fazla konu seçemezsiniz Konular bir harf veya rakamla başlamalı, kısa çizgiler ('-') içerebilir ve en fazla 35 karakter uzunluğunda olabilir.
38 İşleme
2 Dallar
29 MiB
 
 
 
 
Ağaç: fde61e46ca
Dallar Biçim İmleri
${ item.name }
${ searchTerm } dalı oluştur
'fde61e46ca'den
${ noResults }
 ZIP  TAR.GZ
Benjamin Bös fde61e46ca updated soldering BOM to Rev 00.00.02 3 yıl önce
3d models added missing 3D Models 3 yıl önce
FPC_4_extender added gerber for fpc 4pin extender 3 yıl önce
FPC_40_4_extender added fpc Extender because for 4pin 1mm nothing is available 3 yıl önce
Gerber Gerber: change to a single drill file for NPTH and PTH combined 3 yıl önce
bom updated soldering BOM to Rev 00.00.02 3 yıl önce
docs add simple README 3 yıl önce
footprints Did first review, various changes to pcb occured. 3 yıl önce
libs wired up connectors, 3 yıl önce
.gitignore Did first review, various changes to pcb occured. 3 yıl önce
LICENSE.txt license the project under CERN OSHW-S 3 yıl önce
README.md add simple README 3 yıl önce
config.kibot.yaml Gerber: change to a single drill file for NPTH and PTH combined 3 yıl önce
fp-lib-table Did first review, various changes to pcb occured. 3 yıl önce
kitspace.yaml kitspace: add bom 3 yıl önce
rgb_lcd_pihat-cache.lib license the project under CERN OSHW-S 3 yıl önce
rgb_lcd_pihat-rescue.dcm Did first review, various changes to pcb occured. 3 yıl önce
rgb_lcd_pihat-rescue.lib Did first review, various changes to pcb occured. 3 yıl önce
rgb_lcd_pihat.dcm began work 3 yıl önce
rgb_lcd_pihat.kicad_pcb readded OSHW logo to pcb after merge conflict 3 yıl önce
rgb_lcd_pihat.lib began work 3 yıl önce
rgb_lcd_pihat.net updated soldering BOM to Rev 00.00.02 3 yıl önce
rgb_lcd_pihat.pro readded OSHW logo to pcb after merge conflict 3 yıl önce
rgb_lcd_pihat.sch updated soldering BOM to Rev 00.00.02 3 yıl önce
sym-lib-table Did first review, various changes to pcb occured. 3 yıl önce

README.md

demo gif

This is a hat for the 40pin GPIO headered Raspberry PIs that exposes the RGB LCD interface in such a way to make it usable with a (albait very specific) lcd screen with touch screen.

Touch screen support is implemented with the AR1100 over a USB cable, which must be plugged to the RPI seperatly.

For the Backlight a small constant LED driver is on board as well, which can be dimmed by using a the hardware PWM1 with GPIO19.